Hello,
Ive pretty much got the design of my new table sorted, but, before i
go and get the metal work cut, id really appreciate it if someone who
had more experiance than me could look over the details and tell me if
im way off the mark?
Its a moving table design, using THK KR33 units for the y and z axis,
held on a frame made of a mixture of 80x80mm extruded aluminium and
16mm plate.
The work will range from engraving anodised aluminium (new hemes
spindle), to isolation milling of pcbs (wolfgang engineering spindle),
to routing of steel up to about 2.5mm (kress)
The plans are here -
(extruded in yellow, plate in red)
http://www.port23.
http://www.port23.
My possible concerns are the height of the y-axis cross member that i
need to accomidate the work (the uprights will be drilled to allow
lowering of the cross member for other work) and the weight offset
from the cross member, once both THK units and the Kress (or whatever)
are mounted.
So, yep, if anyone has any strong feeling that im going about all this
the wrong way, could they let me know, before i go and get the metal
work cut? : )
Cheers, Julian
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch format to Traditional
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___
Tidak ada komentar:
Posting Komentar